brake lights don't work
Asked by stretch972001 Jun 13, 2013 at 11:24 PM about the 1994 Chevrolet C/K 1500 WT 4WD
Question type: Maintenance & Repair
i just got a 94 chev pickup and all brakes lights don't work! I have checked the fuse which
is goo, and the brake switch and that doesn't seem to work, anything else?
3 Answers
tweetlebug answered 11 years ago
I had a very similar problem on time. I was helping someone who had an 89 mustang and the brake lights didn't work. The fuse would blow as soon as the brake was pressed. We tore out most of the dash, all the seats, most of the plastic, and most of the carpet. We followed the lines from the fuse box all the way to the back of the car. Then we unwrapped all of it. we ended finding the problem in the corner of the hatch door. Someone had tightened a screw with the brake wire under. I don't know if this is like your problem or not, but let me know if it helps!
Most likely is the circuit board for the tail lamps which is a poor design and regularily fails. Are the bulbs burnt?