Trans. Slips and grinds under heavy load

Trans. Slips and grinds under heavy load 2 Answers

Grinds and wont go into 2nd gear 3 Answers

(96 mustang gt) when i try to shift into 2nd gear clutch is engaged, its in the right position it seems and feels like its there. I start to let off the clutch it grinds immediately. Previous owne...

car no heat/overheating; normal temp and heat under heavy acceleration 1 Answer

I have a 94 v6 mustang and it drives fine for a little bit sometimes (heat works) but inevitably I lose heat and shortly after that, temp starts to rise. But, if I put it to the floor, about 75% o...

Leak between trans and motor 2 Answers

I have a 2003 mustang v6 and it's been having an issue on leaking on the bottom between the transmition and motor but it's leaking motor oil i took to it to a mechanic and he was charging me $400...

1986 GT: Engine missing or cutting out for a second under load. 1 Answer

Upon light acceleration the engine cuts out. With no real sophisticated on board computer we can't seem to find the problem. Anyone else with a similar problem and hopefully a solution? 104,000 mi...