Recently bought 1966 Mustang and both front windows need two hands to roll up and down. How can I find out if they are put together correctly?

Asked by Mschear Mar 29, 2017 at 02:57 PM about the 1966 Ford Mustang Coupe RWD

Question type: Maintenance & Repair

There are two bolts that look like they could be adjustments but not hooked
up to anything. It takes two people to get them up or down.. Back windows
work fine.

223,945

Rowefast answered 7 years ago

Just take the door panel off and figure it out.

Mark helpful

Your Answer:

Recently bought 1966 Mustang and both front windows need two hands to roll up and down. How can I find out if they are put together correctly? 1 Answer

There are two bolts that look like they could be adjustments but not hooked up to anything. It takes two people to get them up or down.. Back windows work fine.

1966 Ford Mustang Coupe RWD

-

Maintenance & Repair
I'm trying to fix the heater in my 1966 Ford Mustang, and I read in an answer on here concerning the switches for the heater "Also all 3 of those control levers are hooked to cables. Look under the dash and check to make sure those cables are connected and not broken. Sometimes they stiffen up and break." If one of these (the one reading "heat") were broken, would it stop the heater from starting even though all the other parts are working? And if so, what solution is there to reaffix the switch to its respective cable? 1 Answer

Attempting to fix a 1966 Ford Mustang's heater. One of the switches inside of the car is disconnected from its cable, which has broken. What's the fix?

1966 Ford Mustang Coupe RWD

-

Maintenance & Repair
How hard is it to take out and clean my injectors? I have a 1990 Mustang GT 5.0 7 Answers

My injectors are dirty and need to be cleaned. What do I do to clean them, and how long will it take? Also, how hard are they to take out?

1990 Ford Mustang

-

Maintenance & Repair
Does anyone know how to work the air controls on a 1966 mustang? I'm sure this is a standard Ford part.I'm not even sure what they're called, fan / air conditioning / force blown air, etc.. My 1966 mustang came with A/C standard. In the dash there are chrome controls for the air. One lever is horizontal and has about 5 notches that it clicks into place. It slides from left to right and back. Have no idea what that does. Directly underneath are three vertical levers.. The first one is labeled HEAT. I can't figure out if it being in the up position is turning the heat on or off. Next to that is TEMP. Next to that is a blank one. All three slide up and down. Does anyone have any idea how these work? I'm trying to get the heat to work and am freezing my a** off, as it seems to be blowing A/C. 6 Answers

Air controls for 1966 Ford Mustang with A/C.

1966 Ford Mustang Coupe RWD

-

Maintenance & Repair
i have a 2003 ford mustang gt and both remotes just stop working put new batteries and all that can some one help? 2 Answers

have 2 remotes my main remote stop so I went to get the other and its not working. so I bought new batteries.

2003 Ford Mustang GT Coupe RWD

-

Maintenance & Repair

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.