we swapped a 2003 subaru outback engine with japanese made forester and we now have an idle air control problem. We replaced the valve twice with used ones still have an issue any thoughts

we swapped a 2003 subaru outback engine with japanese made forester and we now have an idle air control problem. We replaced the valve twice with used ones still have an issue any thoughts 1 Answer

we swapped an 03 outback engine with a forester engine. The problem we are having is the check engine light for an idle air control valve. We replaced it twice with used ones and are still having a problem 7 Answers

have problem with Paint chipping to a 2011 Subaru outback 3 Answers

Having a problem with my 2011 Subaru outback paint chipping away..

I removed a gen 1 2.5 dohc from my 99 legacy outback. I installed a gen 2 2.2 from my 99 impreza sport. Problem is the intakes are different. I can't find a gen 2 with the same idle air control as the 2.5 gen one and egr. can I swap to gen one heads and run a gen 1 2.2 intake? 6 Answers

Engine swap that has not been quick. Is there a gen 2 2.2l intake that would have an egr port and the same idle air control as the gen 1 2.5 dohc? I have located one with the egr port covered by a p...

User Feedback from CarGuru to Dealer? I recently had a serious problem with Colin Appleyard who claim that my last half dozen email messages sent via yourselves asking for a Full Refund of my "Fully Refundable Holding Deposit" I believed that my messages were being ignored But after finally receiving a phone call just now from Matthew and an apology, explaining that they had never rceived any of my messages Except the rather Strongly worded email I sent this afternoon! Matthew made the refund immediately! ! 1 Answer

I recently had a serious problem with Colin Appleyard who claim that my last half dozen email messages sent via yourselves asking for a Full Refund of my "Fully Refundable Holding Deposit" I believed ...