I have a 2010 ford expedition limited with some dash problems. there is some loud clicking coming from behind the das and when you turn on the fan its on full blast and cant adjust it. if you try turn off the fan the display turns off but everything is still blowing full blast. any ideas?

I have a 2010 ford expedition limited with some dash problems. there is some loud clicking coming from behind the das and when you turn on the fan its on full blast and cant adjust it. if you try turn off the fan the display turns off but everything is still blowing full blast. any ideas? 1 Answer

I have a 2001 Ford Expedition. It starts up just fine, but if after I drive it for a little while and turn off the engine then try to restart the car will not turn on. The battery is working and the engine is "turning over," but just won't ultimately start up. Any ideas? 6 Answers

I have a 2001 Ford Expedition. It starts up just fine, but if after I drive it for a little while and turn off the engine then try to restart the car will not turn on. The battery is working and the...

I have a 2003 Ford Expedition 4.6, I turn it on but if I let go of the gas pedal it turns off, but while driving long distance it drives perfect even the cruise control works. What can it be I have changed out the fuel filter but still did the same. 1 Answer

I have a 2003 Ford Expedition 4.6, I turn it on but if I let go of the gas pedal it turns off, but while driving long distance it drives perfect even the cruise control works. What can it be I have ch...

My a/c heat rear distribution was making a clicking noise and not blowing out air in the front then after so long it finally stopped blowing in the back too. You can hear the air blowing but nothing is coming out. So removed it but now notice that the clicking noise has continued but not as loud as before, does this mean I also need to replace the temp blend door actuator? too, I'm not having problems with hot or cold. But not sure why the clicking has continued. 2 Answers

HVAC Problems with rear air distribution and/or blend door actuator.

I have a 99 Ford Expedition that started running rough, checked the codes because it is showing check engine soon light, shows code for spark plug 4, took wire off put back on and erased the code 4 Answers

my Ford Expedition is running rough, have replaced fuel filter, air filter, changed the oil. After running a scan it is showing with a P0304 code and when I looked that up it said misfire on number 4....