My water pump, belt and thermostat recently was change due to the pump locking up, now the heat gets really hot when the RPM's is over 1500 but cold at idle. What could be wrong?
2010 Ford Escape Limited V6 (3.0) AWD
mikeatpriestlake answered 9 years ago
make sure the coolant is up to proper level and burp the cooling system. Good you tube vids on that.
Probably has air in the cooling system that needs to be purged out.
2010 Ford Escape Limited V6 (3.0) AWD
2010 Ford Escape Limited AWD
-
Maintenance & Repair
2004 ford escape 3.0 starts and sounds great, but no power and almost won't shift at all and the engine heats up really fast almost to an over heats within minutes. Could be something with exaust syst...
2004 Ford Escape Limited FWD
-
Maintenance & Repair
2012 Ford Escape XLT FWD
-
Maintenance & Repair
I have a 2002 Escape that I recenlty purchased. I noticed that the wheel on the water pump tensioner does not rotate. Can someone tell me if it suppose to rotate? This is the belt opposite of the m...
2002 Ford Escape XLT FWD
-
Maintenance & Repair
I have a 2008 Ford Escape can park it at night and by morning the battery is dead . The charging system is ok .any ideas what could be wrong
2008 Ford Escape XLT V6 AWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.