Asked by GuruD59L65 Jan 13, 2024 at 06:46 AM about the 2010 Hyundai Genesis 3.8 RWD
Question type: Maintenance & Repair
My 2010 genesis sedan has a screen and audio system that is not working. Is
there a reset process for the ECU?
Locate the infotainment fuses in the interior fuse box and remove them, make sure it is only related to the infotainment system, wait 10 minutes then put them back in, this should reset the system. If it still doesn't work then you have either a bad screen or the infotainment system has went. This happened to me and as parts were no longer available I had to go with an aftermarket system.
My 2010 genesis sedan has a screen and audio system that is not working. Is there a reset process for the ECU?
2010 Hyundai Genesis 3.8 RWD
-
Maintenance & Repair
I have a 2012 Hyundai Genesis and my GPS screen went black and inactive after jump starting the car. The screen appears to adjust with changes in light, but is otherwise inoperable. The radio and ...
2012 Hyundai Genesis 3.8 Technology RWD
-
Maintenance & Repair
The DIS screen does not stay illuminated. After the I hit the enter button, the initial screen goes away and the screen shows up clear and bright. But after a varying period of time it will fade out a...
2012 Hyundai Genesis 5.0 R-Spec RWD
-
Maintenance & Repair
The dash display on my 2012 Genesis Coupe suddenly decided that it is always night. During daylight, the odometer, speedometer, tach, etc., all display as a very dark navy blue. This is impossible...
2012 Hyundai Genesis 3.8 Premium RWD
-
Maintenance & Repair
Navigation screen is black, cameras don't work as well as the radio
Hyundai Genesis
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.