2011 dodge 1500 cranks but wont start
Asked by GuruT42JB Jun 07, 2018 at 04:10 PM about the 2010 Dodge RAM 1500 Laramie Crew Cab 4WD
Question type: Maintenance & Repair
my 2011 dodge 1500 cranks but wont start . i check everything still having
problems do anyone know what could that be i knw it could be many problems
but i ran out of ideas.
8 Answers
I don't know what testing you have done? Make sure battery has a full charge. Have helper crank it while you check for spark at the plugs. If spark everywhere, use a gage and proper fuel pressure. Also, check fuel injector pulse. Any applicable trouble codes? If your missing everything I mentioned, have to check crank and cam sensor signals. Don't replace anything unless your testing points in that direction.
2011 Dodge Ram 1500 will crank, but will not completely start, (what I mean by this is, that it does start but does not fully engage), after it sits for more than 30 minutes unless we jump it off. We have replaced the battery, battery terminals, the alternator has been checked, it's not throwing any codes. We thought it might be the security system/ key fob, so we did the process of locking the door, then unlocking, and then starting. We did this after we changed the terminals because at that point we could not get it started even while jumping. This trick worked once. Checked and changed out fuses, replace the fuel relay switch. Have noticed that the fuel pump will continue to run after the key has been removed but not all the time, so took the fuse out at night, still will not start, acts as though it doesn't have enough battery to start. We are at a loss for what to try next. Any suggestions would be much appreciated.
My Self having exactly the same issue with my Durango '15, I just Change the Fuel Pump Relay and nothing, what I do for make it full engine start, is Disconect Negative Pole from battery, open the hood, wait about 20-30 min, then re-conect battery with hood opened and then lock/unlock drivers door with key fob, then start again with the StartOn Button and bingo, works fine until next time, Im thinking could be 2 things Securty/alarm issue Or Software Issue/corrupted, I'll get mine to dealership this week and see what happens
hey guy, i need HELP!! i have a 2011 Ram 1500 with sam issues Crank but no Start.I have changed the alternator and the battery and still wont start without a jump. it even started when i use my wifes truck off im so loss on what it could be please guide me in the right direction. it not a battery or alternator issue what is it???
My 1500 dodge 2011 won't start is look like the fuse of the fuel don't work
Guru95T5Z3 answered 3 years ago
Any one find out my 1500 ram is doing the same thing I've replaced the fuel pump and crankshaft position sensor it will try to start but nothing any ideas
The issue is in the tipm. Search “tipm fuel pump relay bypass”