firebird338 answered 9 years ago
Sensor has to be removed before putting any sealer on it. The sealer has to go on the treads of the sensor to get a good seal. Putting sealer on the outside will not work.
can you use loctite to stop the leak?
2008 Chrysler Sebring Touring Convertible FWD
-
Maintenance & Repair
My 2008 chrysler sebring 2.4l is leaking oil from the back of the engine block on the bolts of the valve cover and oil pressure sensor only when the car is on does anyone know what the problem coul...
2008 Chrysler Sebring
-
Maintenance & Repair
My 2008 chrysler sebring 2.4l is leaking oil from the back of the engine block on the bolts of the valve cover and oil pressure sensor only when the car is on does anyone know what the problem coul...
2008 Chrysler Sebring
-
Maintenance & Repair
Ok so I have a 2004 Chrysler Sebring that is leaking oil from somewhere but it's only on the silver piece that's showing. Thought maybe my head gasket had blown but everything looks normal. It di...
2004 Chrysler Sebring Touring Sedan FWD
-
Maintenance & Repair
Ok so I have had an oil leak develop and it's gotten pretty bad. It's leaking on the back side of the block by the fire wall (keep in mind it's fwd car) and the y pipe is covered in oil but I can'...
2008 Chrysler Sebring Touring Sedan FWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.