How do get the coolant temperature sensor calibrated?, can I do it myself or do I take it to the shop?. Where is that sensor located on the engine?
Also need to know where
my radiator fan fuse
located? I have no Manuel
The sensor is integral to the coolant bleeder valve on the top left side of engine. If temp readings are off, air may need purging via this valve. If the valve assy. has recently been replaced it may read slightly higher than the old unit. Calibration is not possible. Go to mopartechauthority for your service and owners manual for your vehicle, they run about $30.
Also need to know where my radiator fan fuse located? I have no Manuel
2004 Chrysler Sebring LX Convertible FWD
-
Maintenance & Repair
I have a 2001 Chrysler Sebring V6 3.0 Liter Engine
2001 Chrysler Sebring LX Coupe FWD
-
Maintenance & Repair
Hot bubbly coolant in the over flow tank..and when I drove home, it also, just stopped running on the way
2006 Chrysler Sebring GTC Convertible FWD
-
Maintenance & Repair
The trunk is stuck in the open position up in the air, it wont close so not sure where to go from here.
2008 Chrysler Sebring LX Convertible FWD
-
Maintenance & Repair
Not exactly sure if this will fix my problem, the heater blows hotter on the drivers side and gets cooler as you go to the passenger side, it knocks the chill out of the air but doesnt heat the car ...
2010 Chrysler Sebring
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.