Truck won't stay running after cranking
My ignition went out, I changed it
now the truck starts but will not
continue running.
firebird338 answered 5 years ago
Recheck the install of the ignition switch it has to have something to do with it if vehicle was starting before the install.
My ignition went out, I changed it now the truck starts but will not continue running.
2007 GMC Sierra 1500 SL Crew Cab SB
-
Maintenance & Repair
Fuel pump pulls enough fuel to the motor to Crank It up. But will not continue to pump fuel to keep motor running. I've been told that with the key on hold the nozzle on the side of the fuel rail i...
2000 GMC Sierra 1500 SLE 4WD Extended Cab SB
-
Maintenance & Repair
my truck just all the sudden quit cranking I've hit new fuses mess with relays ran into ground wire new battery and then it would start ran fine then one day I quit drinking again and it hasn't I...
2006 GMC Sierra 1500 SL1 8 ft. LB 4WD
-
Maintenance & Repair
Truck just shut off at stop sign but was able to get over to nearest parking lot. It would then start and idle for about 30-45 seconds and then shut off again. If I tried to give it gas while Ideli...
1994 GMC Sierra 1500 C1500 SLE Standard Cab SB
-
Maintenance & Repair
After I changed my slave clutch now my truck will not start
1995 GMC Sierra 1500 C1500 SL Extended Cab LB
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.