83 Dodge 318 power ram

Asked by Guru9R41T Jul 15, 2017 at 10:17 PM about the 1984 Dodge RAM 150 LB 4WD

Question type: General

Truck idels fine but when I apply the brake it stalls
out it has a aftermarket single barrel carb. It was
rebuilt prior to me purchasing in 2002.
I have a new intake manifold and upgading to Holly
street avenger 4 barrel 600 cfm carb could that
correct the issue or is it something else entirely

43,860

Hornet_2497 answered 7 years ago

Sounds like you have a massive vacuum leak in your power brake booster. There's a diaphragm in there that can rupture and leak air. You probably know your power brakes rely on engine vacuum and too much air coming into the intake leans out the fuel mixture, stalling the engine. You can usually hear a leak that big or test for a big drop in vacuum when the brakes are applied. I hope this helps.

Best Answer Mark helpful

Guru9R41T answered 7 years ago

Thanks brotherman I'll look into that and reply back that makes sense since my like for my e brake is on even when the e brake is off probably as a brake system check lite I appreciate the feedback

Mark helpful