ABS and brake warning lights on dash
Asked by astroglove Nov 23, 2015 at 07:29 PM about the 2003 Dodge Dakota SLT Quad Cab RWD
Question type: Maintenance & Repair
Driving tonight the abs and brake lights came on in my information center on
my dash. I still had plenty of brake, was wondering what it meant?
8 Answers
The sensor on the wheel(s) could be defective or dirty. You can drive the car but you will need to be very careful no sudden stops because your ABS may not work. Try cleaning sensors at each wheel with a good contact cleaner. If that doesn't work you will to bring the car to the shop and have them test each of the sensors.
You would have to get the code or codes read by a scanner. Then you will have an idea on what needs to be fixed.
DakConvert answered 9 years ago
I have had the same problem intermittently on my ’90 Dakota. I replaced Rear ABS Speed sensor only to find out I also had a short in the wiring. It turned out that the wire sagged and rubbed the sheathing bare. It was a bugger to find since the wiring follows the path of most resistance.
That would be least resistance..., good diagnostic of the problem, but like my scanner will tell you the area of the problem so you are not searching everywhere for it. (right front wheel sensor, left rear,etc.)
I changed my brakes on my dodge 5.2 1997 for got to bleed brakes could that cause my abs light to come on
Yes it could GuruB3CJ6
on mine it took out the cruise control on my2006
Guru9Z5RFG answered 4 years ago
I was wondering what scanner will read abs and brake light for 99 dodge dakota sport 4×4