where is the camshaft position sensor located?
Asked by workingmanfree Aug 04, 2012 at 01:13 PM about the 2003 Dodge Neon SE Sedan FWD
Question type: Maintenance & Repair
3 Answers
s_staples35 answered 12 years ago
It is on the drivers side. Bolted to the head. Easier to get at if you take out the battery and battery tray.
5 people found this helpful.
There are 4 bolts holding the cam sensor to the back of the head, on the transmission side. There is a rubber o-ring that seals the sensor to the head, be sure that it seats properly on re-assembly, otherwise it will leak oil. I think the bolts are 8mm, and are easily accessible once the breather tubes are relocated (I did mine with a 1/4 drive ratchet).
6 people found this helpful.