I have a 2000 Durango AWD. I broke my cv axle. Have to drive it in 4Hi temp otherwise it makes a really bad noise from that side. I'm not using highway. Only in town which only goes to like 40-50 max

I have a 2000 Durango AWD. I broke my cv axle. Have to drive it in 4Hi temp otherwise it makes a really bad noise from that side. I'm not using highway. Only in town which only goes to like 40-50 max 1 Answer

I have a Durango with a 5.9 and 46 tranny and was wondering what it would take to drop it to a 2003 Durango in way better condition. I'm assuming I would need to do a tranny swap but I'm not to sure. 1 Answer

I have a 2000 Durango slt with a 5.9 and was wondering if I could drop it into a 2003 Durango 4.7

I have a 2004 Durango suv after it sits for a few hours it is really hard to start 1 Answer

does not show code as had a meter placed on it ...to get it to finally start I have to pump the daylights out of it..then it runs ruff for about 10 seconds... some one suggested it has lost it's pri...

i have a 2003 dodge durango 4.7, 4x4. its very slurgish in taking off its as if its taking of in 3rd shift, how ever if i manually shift it to shift1 then 2 then to D acting as 3rd it moves well .it does not start from 1st shift by itself. Please somebody help...... 7 Answers

My 2003 dodge durango 4.7,4x4. Will always take off slugishly as if in 3rd shift. This problem started 5wks ago. anytime i start shifting it manually from 1 it move out well then manually to 2 it move...

I have a 2004 Dodge Durango. While driving, I lost all power to the wheels, yet all electrical and engine seemed to be operating. Pulled over, and it would not move , regardless of what gear I put it in ( N, R, D, 1, 2 ) My first guess is the transmission went out, but could there be a sensor or other cause for this. When I accelerate, I hear the engine, but still have no movement in any gear. 8 Answers

I have a 2004 Dodge Durango. While driving, I lost all power to the wheels, yet all electrical and engine seemed to be operating. Pulled over, and it would not move , regardless of what gear I put ...