1988 f-150, 302, i changed the injectors because of a constant miss. previous owner changed the # 8 injector but put the wrong one in it. I put correct ones in and it idels a little high but is smooth. Driving is rough, miss's under a load or acceleration. any ideas???

Asked by Chris Oct 14, 2013 at 03:11 PM about the 1988 Ford F-150 XL Extended Cab LB

Question type: Maintenance & Repair

Idel is a little high, but the issue is the miss under a load or acceleration while driving. rev it in park and it runs great.

Chris answered 11 years ago

yea that was all done a few months ago.

Mark helpful

Chris answered 11 years ago

ended up being IAC and TPS. runs great now. thanks..

Mark helpful

Your Answer:

1988 f-150, 302, i changed the injectors because of a constant miss. previous owner changed the # 8 injector but put the wrong one in it. I put correct ones in and it idels a little high but is smooth. Driving is rough, miss's under a load or acceleration. any ideas??? 2 Answers

Idel is a little high, but the issue is the miss under a load or acceleration while driving. rev it in park and it runs great.

1988 Ford F-150 XL Extended Cab LB

-

Maintenance & Repair
When my pickup is in 2wd and put it in gear, all you hear is a grinding and,the pick up wont move, but if i put it in 4wd high,and lock the hubs, it drives!, whats the problem? 1 Answer

Pick up wont drive in 2wd it just grinds but when,i put it in 4wd and lock the hubs it drives what's the deal?

1986 Ford F-150 STD Standard Cab 4WD LB

-

Maintenance & Repair
I have a 2000 F150 Extended Cab 4.2L V-6. On the drivers side firewall is a cylinder and out of the bottom are two vacuum lines. One of them comes from the bottom of a black fluid refill reservoir and runs to under the throttle body. It has collapsed and is making the truck run rough. Is that part of the Smog System? It's on the firewall, almost sitting on the top left of the brake booster and in front of the clutch refill reservoir. any ideas what vacuum line that is? Thanks. 2 Answers

I have a 2000 F150 Extended Cab 4.2L V-6. On the drivers side firewall is a cylinder and out of the bottom are two vacuum lines. One of them comes from the bottom of a black fluid refill reservoir a...

2000 Ford F-150 XL SB

-

Maintenance & Repair
I have a 2012 Ford F-150 FX2. When driving it will shut off and the tool picture on the screen the engine light is also on. I have to pull off the the road and put it in park and restart it. 1 Answer

while driving my 2012 F150 will shut down and the tool picture comes on and the engine light is always on. I have to pull off road, put it in park and restart it will cut off twice every mile. I wa...

2012 Ford F-150

-

Maintenance & Repair
i put a new ignition switch in my truck but to do it i took apart the top of the column to do so and when i did a piece fell out with a spring and i got it to where it all goes back and i don't know where the spring looking thing goes and now it is like the key aint telling the transmition its on because it wont go into gear it wont shift out of park 5 Answers

this si my everyday driver i need it fixed asap

1986 Ford F-150 XL Extended Cab LB

-

Maintenance & Repair

Looking for a Used F-150 in your area?

CarGurus has 15,355 nationwide F-150 listings starting at $1,954.

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.

1988 f-150, 302, i changed the injectors because of a constant miss. previous owner changed the # 8 injector but put the wrong one in it. I put correct ones in and it idels a little high but is smooth. Driving is rough, miss's under a load or acceleration. any ideas???

2 Answers

Your Answer:

Looking for a Used F-150 in your area?

Shortcuts

Search Ford F-150 Questions

CarGurus Experts

Find great deals from top-rated dealers

Related Models For Sale

1988 f-150, 302, i changed the injectors because of a constant miss. previous owner changed the # 8 injector but put the wrong one in it. I put correct ones in and it idels a little high but is smooth. Driving is rough, miss's under a load or acceleration. any ideas???

2 Answers

Your Answer:

Related Questions