Try checking the engine compression. Maybe you have burned valves or other problems from high miles.
Yuri_romanova answered 8 years ago
Check IAC valve. Thats what controls airflow into the engine. Also check fuel pressure.
1988 Ford Ranger STX Extended Cab 4WD SB
-
Maintenance & Repair
OK here I am again, 1988 ford ranger 2.9. I had the transmission rebuilt. Ever since then it has been idling rough. I have changed the PVC valve, fuel filter, plugs and wires,distributor cap and rot...
1988 Ford Ranger STX Extended Cab 4WD SB
-
Maintenance & Repair
Truck shut off pulling out of my driveway we have checked the distributor, pickup coil, ignition module, coil , distributor cap and still no fire it will turn over but that’s all
1987 Ford Ranger
-
Maintenance & Repair
I have a 1987 Ford Ranger 2.9 engine - I was driving down the road and it just stopped running - had the truck towed home - Things we checked: Its getting spark its getting gas we try and use starte...
1987 Ford Ranger
-
Maintenance & Repair
08 Ranger 2.3 L won't start . Tapped solenoid and it started . Put new starter on and now nothing . Took starter back off an tested good . Battery is hot . Terminals clean , put on another ground stil...
2008 Ford Ranger
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.