No brake lights
Asked by BrandonL91 Apr 11, 2018 at 08:40 AM about the 2006 Ford Crown Victoria Police Interceptor
Question type: Maintenance & Repair
I have 2006 crown vic p71 I have no brakes lights and
third brake light I replaced brake light switch , multi
function switch and bulbs took test light to switch shows I
have constant power but no power when I engage brakes
8 Answers
Hi Brandon, I have a 06 CVPI myself and have a sneaking suspicion it might be your Lighting control module
there is some sort of problem with the pressure impeller coming from the master cylinder which i am currently having . i haven't figured it out yet. the light switch can check good but it will not switch on.
The third light works but the other two dose not
both brake lights work on my 2008 ford cv, but my third brake light does not work. I've replaced both bulbs with the correct size. can anyone advise me what to check??
Please check your fuse under the hood of your vehicle #20 could be blown
Hey i got a 03 crown victoria the third brake light work but the other two dnt...what can be the problem
2005 CVPI, I had the same problem, drove me crazy. New switch,New connector! Here is the answer. Took it to good mechanics, they cut 3 wires. Left only 2 connected, all lights work good. Police cars have a brake light OUT switch, "BOO" switch. that was the problem, they cut that/those wires out, I could NOT find how to do it. 150 dollars.
I have a 2006 CVPI. Brake lights only work when the headlights are on...any help would be appreciated.