Hornet_2497 answered 5 years ago
Scan for fault codes and fix accordingly. It sounds like the crankshaft position sensor (P0320) is acting up, needs replaced.
Hornet_2497 answered 5 years ago
I fixed mine. It can also be the coil pack or a weak/failing fuel pump. Scan for fault codes and fix accordingly.
when you say scan do you mean when it's not starting? scan first thing in the morning when it does start up.
2006 Jeep Liberty will not start after gets hot then starts when it cools down
2006 Jeep Liberty Renegade 4WD
-
Maintenance & Repair
When I turn the key, the lights come on, the little bell dings but car will not start or turn over. Had battery, starter and alternator checked and all tested good. Any ideas?
2004 Jeep Liberty
-
Maintenance & Repair
All electrical and lights turn on but engine will not turn over.
2008 Jeep Liberty Sport 4WD
-
Maintenance & Repair
Recently has trouble starting after getting warm but would start. Two days ago, it would turn over but not start. Fuel pump primes (you can hear it) plus, crankshaft position sensor and camshaft p...
2005 Jeep Liberty Limited
-
Maintenance & Repair
the 2002 jeep liberty sport has been packed for over 12 months, and will not start. What could be the problem?
2002 Jeep Liberty Sport
-
Maintenance & Repair
CarGurus has 23 nationwide Liberty listings starting at $2,495.
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.