location of camshaft sensor 2007 yukon
1 Answer
lincolnscott49 answered 3 years ago
in the lower front of the engine behind a metal cover with three bolts behind the pulley to the left of the crankshaft pulley.
lincolnscott49 answered 3 years ago
in the lower front of the engine behind a metal cover with three bolts behind the pulley to the left of the crankshaft pulley.
2007 GMC Yukon XL Denali 4WD
-
Maintenance & Repair
I have a 2007 Yukon XL with a hundred and forty-two Thousand Miles. I replace the oil pressure sending unit about 45 days ago. Just last week the low oil pressure sensor came back on. A trusted me...
2007 GMC Yukon XL
-
Maintenance & Repair
if im standing in fron of vehicle, where is cylinder 7
2008 GMC Yukon XL SLT RWD
-
Maintenance & Repair
I have a 2007 GMC Yukon XL that has a very loose Ground cable on the battery terminal. The terminal is closed as tight as it will go, however it still moves on the Ground post freely. The computer r...
2007 GMC Yukon XL SLT 4WD
-
Maintenance & Repair
I have a 2007 Yukon XL with like over to hundred thousand miles. The oil pressure went down and the light came on saying stop engine. no noises, plenty of oil, no other problems. shop changed the se...
GMC Yukon XL
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.