can i put a 2005 3.7 in my 2003 liberty?
24 Answers
yes,everything will work,no on ecu.
papa thx for reply but i was told only a 2002 or 2003 engine will only work due to the reluctor rings on the crankshaft and cam not allowing the ignition and fuel injectors to fire not allowing the engine to start.
you were told wrong,00,01 02- 03 04 05 will work,every 3 years they change,
again thx papa i have found a very low mileage 3.7 out of a 2005 liberty with only 4k miles on it for 1400.00 and was hoping this engine would be a direct fit with no electrical problems and compatibility problems with the 2003 ecu.
Papaobewon answered 9 years ago
My information tells me the reluctor ring on the crankshaft has to be changed and the tone gear on the camshaft as well! For the 2005 liberty 3.7 ! To be compatible with your system! The windows on the camshaft have a different sequence so it must be changed or timing will be off!
Una pregunta yo tengo un Jeep liverti 2006 que le puse el mono blok de un 2002 sies compatible ono porque no me arranca nomás esterea pero no tiene chispa en las bujías gracias por su ayuda aber di alguien puede sacarme de estas duda
Hornet_3176 answered 7 years ago
Who ever made these jeeps should have them drove up there ass yes I own one of thes things it's something all the time just saying
Will a 2003 Jeep Liberty 4 wheel drive transmission fit in a 2004 Jeep Liberty 4 wheel drive both are v6 and 3.7 ltr
Is Dodge 3.7 v6 interchangeable from 02 and 03
i have jeep liberty sport 2003. manual transmission. can i fit any engine from 04, 05, 02 inside
Can you put a 2005 3.7 v6 jeep liberty motor in a 2004 jeep liberty 3.7 v6 motor
Can I put the cams and crank out of my 03 3.7 into my new engine 05 3.7 will it work
It should work if your using thevfatorybtone wheels
alexpalafox answered 6 years ago
inocente,el engrane del cigueñal es diferente, hay de 16 dientes y de 32 dientes, fijate cual traes tu y cambialo y con eso va encoder ,yo tuve el mismo problema
we installed 2005 jeep liberty 3.7 in a 2003 jeep liberty 3.7 and we are running in to a timing problem. its hard to turn over and when you unplug the cam sensor and then will turn over with out hesitation so that leads me to be leaves it has a timing problem .
What replacement engine can I use for a Jeep Liberty 2003 6V?
Can't I just swap the 02 ecu into the 06 along with the motor?
I have a 3.7 L 2006 Jeep Commander what other motor clean up put in it
Can. I put engine 2003 Jeep Liberty in 2002 Jeep Liberty 3.7
Jeephawks03 answered 5 years ago
You can fit a 351 Modified in it though with no issues.
Will 2004 jeep liberty front suspension fit a 2005?
Change the relucctor on crank and tone gear on cam for it to work in a 03 or o2 bc you will run into timing issues
Can I change my pcm off of my o4 Jeep Liberty and put an 06 pcm on there will it still work