Front end noise with tire, any ideas what's going on?

Asked by Pdeoliveira Jan 06, 2016 at 01:56 PM about the 2001 Mazda 626 LX V6

Question type: Maintenance & Repair

Whenever my car is in motion plus it's in gear and I'm accelerating there is a
front right tire noise the noise is as if something is been caught multiple times
per tire revolution yet when the car is in motion while in neutral the problem
isn't present anymore. No obvious deformities when I looked at the front right
end. Help?

F_O_R answered 8 years ago

Wheel bearing going bad or rock in tire tread are possibilities. What does it sound like? The sound on my computer does not work. ;)

1 people found this helpful.

Mark helpful

Your Answer:

Front end noise with tire, any ideas what's going on? 1 Answer

Whenever my car is in motion plus it's in gear and I'm accelerating there is a front right tire noise the noise is as if something is been caught multiple times per tire revolution yet when the car ...

2001 Mazda 626 LX V6

-

Maintenance & Repair
Thumping noise from front right tire 4 Answers

I juat replaced my tie rods and ball joints on mt 626 and about 5 days later, she is now making a thumping noise when accelerating after 15 mph, decelerating and turning right but when i turn left ...

1998 Mazda 626 ES

-

Maintenance & Repair
my car is having trouble starting. when it does get going, it revs high for a bit and sometime even revs up & down on it's own. this happens until it gets going for a while. any ideas? 2 Answers

my car is having trouble starting. when it does get going, it revs high for a bit and sometime even revs up & down on it's own. this happens until it gets going for a while. any ideas?

1990 Mazda 626 DX

-

Maintenance & Repair
2000 Masza 626 OHC Car wont start, all lights work, just that it doesnt turn over..I tried again about an hour later and it started right up..Got it home and again nothing it wont start. ANY IDEAS? 3 Answers

The car doesnt start..I turn the key but nothing..There are lights and they work, radio works, and when I went back about an hour later it started again. I got the car home and when I parked and tur...

2000 Mazda 626 ES

-

Maintenance & Repair
My 1991 mazda 626 automatic is not selecting any gear i have checked the fluid levels and it is ok.Could there be a fuse blow or something like that since they are electronically controled? 1 Answer

It is not selecting any gear (automatic) i have checked the selector on the gearbox and it is still working.Since they are electronically controlled are there any fuses that could be blown or could th...

1991 Mazda 626 LX

-

Maintenance & Repair

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.