Chevrolet C/K 10 Questions Maintenance & Repair

My C10 69 Gas Gauge Doesn't Work Right, One Day Is Full Tank And The Next D...

Cant Turn Key Past "ON" Position To "START"

I tried starting my truck and the ignition locked up and wouldnt let me start the truck. I can put the key in the ignition and turn it to the "ON" position but I physically can't turn the key past th...

1960 Chevy C-10 Horn

I just bought a 1960 C-10 Stepside. The horn does not work. The previous owner has a marked wire for the horn (horn toots when power applied). The previous owner has a wire for power nd one coming ...

Is My Fuel Pump Dying?

I have a 1985 Chevy K10 pickup with a 305 TPI from a 1986 Camaro. I think I need a new fuel pump. It'll hesitate when I start it, takes like 5 seconds to start, normally it fires right up. When you t...

Would A 350V8 Engine From A 1996 Suburban Fit In A 1969 C10 Stepside Pick U...

Hi. I am from the Philippines. I recently saw a 1969 Chevrolet C10 Stepside pickup for sale. Thing is it comes with a fitted Nissan RD28 engine. i said I wanted the original engine back which I think ...

Proper Order Of Horn Button Mount Parts?

My wife and I received her grandfather's 1970 C10 and are restoring the remaining pieces. Steering wheel was replaced with new OEM model (2 Spoke). The horn button mounting hardware has no instructi...

Can I Replace The Clutch Hose With A Solid Brake Line?

have to replace the slave cylinder and need to know if i can replace the clutch hose $83.00 with just a brake line and what size would i need if i can?

How Can I Tell If My Truck Is Running Rich And Should I Fix It Even Though ...

Truck Not Turning Over

I just bought a '68 c10 and it was running fine no problems, when I went to start it up the other day it had been left with the ignition left in on all the lights worked in the cab and exterior. i gue...

Gas Smell Inside My Chevy 1964 C10 Stepside

I just bought a 1964 chevy stepside c10. I don't know anything about how the gas tank in the cab is suppose to be vented to the outside. As far as I can see, there is just 2 short "about 2 inch" tub...

Looking For Doors/fenders For My 1964 C10

Tranny Going Out Or Just A Seal

I have a 73 k10 that is leaking like crazy out the front of the transmission. i was told i just need a seal but could this be the sign of needing a new tranny? I go through a quart almost every day. A...

Right Side Window Will Not Crank Up Or Down

Just bought a `63 stepside Right hand window will not crank up or down.By feel..everything seems in place.Even oiled where I could.As a novice..please help with any suggestions.Thanks

Problem With Getting The Truck Into Gear.

Im having trouble with getting my truck into drive. its a 1985 K10 with an automatic. I can get it into park, reverse, and neutral no problem but i have trouble getting the shifter down to drive and t...

Truck Won't Go Into Gear Unless In 4L

Bottom line - I was in 4Hi ... I was having trouble backing up on some ice... I put the truck into 4Lo and started to pull out and I heard a loud clang (metal on metal). Now, my truck won't go into g...

Interior Light Stay On, On 86 K10

I have a 1986 k10. My interior light wont go off when you pull out the headlight switch. They dont come on until you pull out the switch. But then i cant make them go off. I have already replaced the ...

Anyone Know Where To Get A Intake Manifold For A Inline 6?

My truck, 66 C10, original motor and trans, long wheel base, converted from stepside to feetside. Should be painted in the next few weeks, new pictures up soon.

Im Getting Power Through My Starter But The Starter Wont Try To Engage The ...

Dash Vents

i have a 1986 Custom CK that i have done myself and have had it 10 years,but i need 3 vents that go in the dash and cannot find them. Any ideas? Thankyou in advance. Tom

Does Anyone Know Of A Reputable Mechanic In Or Near Livermore, CA That Work...

I am having some ride problems (I feel increasing "pulses" in the steering wheel as I drive-it's parked until I can find a good mechanic), and was wondering if anyone knew of a reputable mechanic who ...