Chevrolet C/K 10 Questions Any type
Transmission
Is a 1988 s10 700r4 the same as a 1987 k5 700r4
Grinding When Engaging Starter To Flywheel
When turning over my truck new starter grinds as it catches flywheel as if the car were already started type sound occasionally it will catch properly and start after several tries, what's causin...
350 Motor
350 motor top is rebuilt it runs great and drives excellent for about 10 minutes then falls on its face. It starts back up right away but once I put it into gear it shuts down? I have a fitech fuel...
Frustrated! Please HELP!!
I have a 1979 Chevy Silverado pickup truck. I got ahold of bad gas so I dropped the tank and drained out all the bad gas.. still nothing! So I changed my fuel filter and it turns over and as long...
1966? Or 1968?
Could someone tell me how I could tell if my 4x4 frame is a 1966 or a 1968 ? I recently purchased a frame that I was told was a 1968 but I also have a 1967 4x4 frame and a couple of the measurement...
78 Chevy C10 Electric Choke On Holley Carb
I need to connect my electric choke wires and was needing any pictures that could help me to make sure I'm connecting it correctly to the relay on the f firewall.
1972 C10 Stops Running After 40 Mins
My 1972 runs great but after about 40 mins of running it stops. It will turn over but not start. If I leave it for a while then it will run again. Before it stops it lurches.
Firing Problem
1970 Chevy c-10 can pull the plug wires off and doesn’t change motor on 4 cylinders. Pull the plug out put in spark plug wire and it fires through plug so it’s fire through to the cylinder but it d...
Turn Signals Are Solid When Flip The Blinkers
My turn signals are solid when I flip the left or right blinker but my hazard lights are working properly. I have replaced the turn signal switch and checked the fuse it is still good. This just st...
Play In Steering
What is usually the most common reason there would be for play or slop in my steering on 1978 chevy K10 4x4 truck?
1984 Chevy Silverado C//K 10
I too have a Silverado that I swapped out the 305 for a 350 (350 tranny also), but I want to get rid of the carburetor, so how late of a model engine do you suggest? Someone suggested a 2010 Corvett...
1962 Chevrolet 4x4
Just bought this factory 62 4x4 Had a 6 cylinder automatic originally. Has been converted to 327 3 speed automatic
Hazards
I broke my hazard switch with the hazards on and I can't pop the button back out. I have the negative unhooked but I'm not going to drive it with the hazards on.
72 Chevy Cheyenne Waa Waa Waa Then New Battery Dies (Girl Question)
Just got up and running, now Whaa whaa whaa and then the battery seems dead. Won't start consistently. Starts with a good jump? Battery new and tested. Grandpas Truck, one owner 160 on new engine. ...
1984 Chevy K20
I have no dash lights and no running tail lights does anyone know what fuse that is?
Mid 60's Factory K10 (Carry All/Suburban
Have had this for a long time. I don't drive it anymore simply because of the drum brakes that were standard on the 65 Dana 44 CLOSED KNUCKLE front axle...don't want to kill anyone. Want to swap t...
1986 K10 Steering Column Swap
Will a 1991 GMC 1500 steering column fit into my 1986 K10, standard, no tilt. Is the length similar?
No Insrtument Panel Lights
I have a 1983 chevy silverado c10 I have on instrument panel lights I have change all the bulbs replaced the circuit board change the headlight switch checked all the fuses still no instrument panel l...
Breathing In Fumes
My husband owns an 85 Chevy c10. We live in a 100+ year house that has many leaky windows and doors and he parks his truck under the carport on the side of the house right by the front door. In ...
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.