Mazda B-Series Questions Any type
Front Wheels Won't Turn
So I drove my truck yesterday all around town had to take my kid and wife to work it ran fine this morning go to take my kid to work and start it up put it in gear and the front wheels will not tu...
Mazda B4000 New Starter Grinding
I have a 2003 mazda b4000 4.0, 5speed 2 wheel drive, I got a new starter 2 bolt and I tryed everything and it grinds every time . It has worked for about a month also having a slight grinding sou...
2009 Mazda B4000 Bed Replacement
I am looking at buying a 2009 Mazda B4000 but it has a bad bed, Will it swap out with a Ford Ranger or other Mazda's? If so, what years would be compatible?
2000 Mazda B2500 5speed
I have a 2000 Mazda b2500 I came home one day and cleaned up a little bit jump back in truck and when I turn it over it sounds like a loud power drill noise and it's right under the gear shifter li...
1993 Mazda 2600i Why Is It Running Rough When Cold
My b2600i starts up right away when cold it runs rough like on 3 cylinders after a minute or so it runs fine
What Radios Are Interchangeable With Mazda That Will Plug Right In
Am/Fm/cd burned up will the existing harness work with am/fm/cd/cass since that is all I can seem to find, will ranger radio also work
Master Cylinder Needs Bleeding Freak All The Way To Floor
How to bleed master cycled without taking all tires off
1984 Mazda B2000 No Warning Engine Stall While Driving.
I have an 84 b2000. It was running completely fine until last week when it randomly while i was driving began to stall. Since then its done it everyday multiple times. Ive replaced the fuel filter,...
1989 Mazda B2200 Engine Swap To 89 626
How hard would it be to put a 89 626 2.2l fuel injected engine or ford probe engine in an 88 mazda b2200 truck that was carbureted?
2006 B2300 Engine Swap
I have a 2006 Mazda B2300 w/ a 4cyl and I was wondering if I could swap it out with a 2006 Ford Ranger V6 engine and Trans?
Mazda B2200 Same Parts
I have a 1992 mazda b2200 and the exhaust system is gone and was wondering if a 1992 nissan trucks exhaust system would bolt on to the mazda? Would i have to do some tinkering to get it to fit?
Hydraulic Clutch Line
I replaced the master cylinder as well as the clutch hose and about 3 years ago replaced the slave cylinder but now the clutch is sticking and when I press it too hard the clutch hose pops out of t...
Can Someone Help With My Car ?
Motor in good condition and has only 120k. The transmission has to be shifted manually from first to second,the drive has gone out but new solenoids have been installed any idea what the problem c...
Altenator Not Charging
My battery isnt charging. I have no system drains when car is off (tested with voltimeter). With volitmeter i get a strong voltage reading from hot wire on alt to anywhere on engine and neg batter...
1996 Mazda Hazards Work But Turn Signals Don't
I've got a 96 b4000 that's the hazards work but the turn signals don't checked the one relay under the steering column is there another one in missing because that ones fine
1992 B2200 Engine Swap
I was wanting to know what engine swap could I do with out a lot of modifications? I was wanting to do a V6 if possible.
94 Mazada B3000 Engine Upgrade
94 Mazada B3000 manual. What is the newest engine that i can replace my 94 engine with? 03?
How Do I Remove. Harmonic Ballancer
removeing harmonic ballancer
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.