Mazda MAZDA3 Questions Any type
How Many Axles Does A Mazda 3 Have?
Firestone dealership quoting brake repair at 150.00 per axle. Are there there 4 or 2?
Both Tail Lights Out Simultaneously?
Headlights work. Interior lights work. When I use my remote door unlock, tail bulbs flash. However, with car running and lights switched on there are no lights whatsoever coming from back of vehicl...
Any Tips On How To Remove Rust Specks (that Scrape Off) Near The Wheel Well...
My White 2014 Mazda 3 has several tiny rust specks on the lower doors and around the wheel well. When lightly scraping with my finger nail, the rust comes off with no paint damage at all. It seems l...
2012 Mazada 3 Light Switch
help. I have a 2012 Mazda 3I. I have only 3 settings, no lights, daytime running lights, and high beams. Is this right? Is there another switch I have to buy that gives the option for Low Beams at n...
Engine Revs At Shift
2005 mazda 3 standard...changed the clutch and for some reason the car idles and runs horrible. While sitting the car idle fine, but when driving it runs high and when pressing in the clutch the r...
Where Can I Locate The Condensation Drain Tube On A 2008 Mazda 3?
I have a swampy smell coming from my car and was told to unclog the condensation drain tube. I was told it was under my car but I haven't been able to find it. Please help!
Wobbly/Unsteady Car
Hi, I'v been driving my current car for a couple of months now and only recently has it been feeling very unsteady while driving. When I'm driving it feels as if one of the tyres is going to come lo...
2007 Mazda 3 Replaced Thermostat Now Cool Air On Idle
2007 Mazda 3 - Threw a CEL - (P0128 - Coolant Thermostat (Coolant Temp Below Thermostat Regulating Temperature) Fixed CEL by Replacing Thermostat - I Flushed Coolant and Replaced Thermostat - ...
Is My Mazda 3, Built In 2005, OBD2 Compliant?
I need to know for certain if my car (Mazda 3, built in 2005) is OBD2 compliant. I can see the port where an OBD2 port would be and it looks an awful lot like an OBD2 port, but I can't find any labe...
How Do You Know If You Need Bearings Replaced ? I Have A Mazda3 Hatchback T...
Also I am told I have a bent rim (7/10 bad) What do I fix first?
What Are These Black Tubes For?
I accidentally jacked up the car under these tubes, I'm not sure if it will affects the performance of the car.
View Old Listings
How can I view an archived listing
Mazda 3 Sp23 2005
My clutch was slipping for a few days, now it's not working, peddle feels a bit weak but still works, put car in gear while engine is running , won't move,
Transmissions
How good are transmissions on 2011 mazda 3
Going Over Bumps
I drive a Mazda 3 '07. When I go on bumps (street or highway), the tires kinda lose grip of the road. Is it the shocks as well?
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.