The filter may be plugged up or you have a bad regulator. Try testing the fuel pressure at the rail, if you don't have a fuel pressure tester some auto parts stores loan them out (just need to leave them a deposit). With the key on and engine off you should have 45 to 60 psi.
I hear the pump kick on, took hose off filter gas poured out. But still no gas to the engine.. Checked all fuses & relays
2006 Ford Crown Victoria
-
Maintenance & Repair
Transmission coming off a 06 Grand Marquis police package is going on a 06 Crown Vic police package
2006 Ford Crown Victoria Police Interceptor
-
Maintenance & Repair
Will a 2008 crown vic transmission fit in a 2006 crown vic with out problems or the need of other supporting swaps? You know just bolt it in and go.
2006 Ford Crown Victoria Commercial Fleet LWB with Police Package
-
Maintenance & Repair
Fuel pump location on a 1987 ford crown vic 302 5.0 v8 and is their more then one fuel pump
1986 Ford Crown Victoria
-
Maintenance & Repair
I'd like to know if I can hardwire the fuel pump on a Crown Vic with a relay pigtail and a relay is it possible
2004 Ford Crown Victoria LX
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.