my f150 goes into any gear but when i press on the gas pedal the only thing moving are the rpms, what would i need to check first to see what the problem is?

my f150 goes into any gear but when i press on the gas pedal the only thing moving are the rpms, what would i need to check first to see what the problem is? 1 Answer

i need to the what engine was put in my f150 3 Answers

i was given these numbers from the sticker on my engine E1900-191002-69636068.and i need to know what type engine this is as i am having a problem getting it up and running as it was put in before i...

i put a new ignition switch in my truck but to do it i took apart the top of the column to do so and when i did a piece fell out with a spring and i got it to where it all goes back and i don't know where the spring looking thing goes and now it is like the key aint telling the transmition its on because it wont go into gear it wont shift out of park 5 Answers

this si my everyday driver i need it fixed asap

I drive a '92 F150. The problem is, when i press the gas from a dead stop, the RPMs shoot down and the engine cuts off. (happens once a day). 3 Answers

After this happens, when i try to start it again, it wont for about 5 minutes, unless i press the gas petal while trying to start it again. the it takes another few minutes for it to run again smoothl...

Thank you for your comments about my problem with my 1996 for f150, I checked to see if the fan clutch was able to move, it is very secure, there has been a new serpenteen belt put on. So still don't know what is causing the noise, happened one day after it was worked on. 1 Answer

truck is making a noise like some thing is hitting the fan or fan is hitting something this happened after serpenteen belt was put on, a new water pump, and a throttle control sensor, because my tru...