Hornet_2497 answered 5 years ago
If you are talking (valve) timing belt, it's more complex than explaining it here. Check on YouTube for a hands on video. This might be an interference engine and will be damaged if done wrong. Replace water pump while you have it apart. Some replacement belts come with timing marks and it helps if no one has rotated the engine during disassembly. At 100K miles these belts can be inspected through a port under the crankshaft pulley. Have fun.
Has anyone ever had to time a 2006-2010 VW Passat with a 2.0t tsi engine and done it themselves, or know of anyone who has? I have a few questions!
2008 Volkswagen Passat Komfort
-
Maintenance & Repair
2008 passat was driving fine then it just died,fuel pump is fine but pretty sure its not firing any sugestions,i also checked the timming belt and its fine
2008 Volkswagen Passat 2.0T
-
Maintenance & Repair
I have 2008 Volkswagen passat and something keeps draining my battery. I took it to the shop and they told me it was the starter, but that wasnt the problen because i still have the same issue, and...
2008 Volkswagen Passat Turbo
-
Maintenance & Repair
Recently my tensioner broke in my Passat & devastated my engine. After rebuilding the engine and retiming the chain my car will still not start. When it is not timed and we check engine compression...
2008 Volkswagen Passat
-
Maintenance & Repair
Hello there I just recently got a 2008 Volkswagen Passat 2.0 turbo and it ran perfectly fine until I took of the battery for a few minutes and when I tried starting it, it just cranks and doesn't s...
2008 Volkswagen Passat Komfort
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.