TrailBadger answered 7 years ago
Because of the taillight housing's design, moisture can enter cracks or the housing seams and collect on the contacts of the lamp bulb. The bulb could have burned out or the contact simply need to be cleaned with an emery board or fine sandpaper.
Have brake and signal no tail light driver rear
2011 Jeep Wrangler Sport 4WD
-
Maintenance & Repair
My abs light and traction light has been coming on for the past month. It usually comes on after I've been driving for ten minutes. I also feel that could be described as grinding in the brake ped...
2016 Jeep Wrangler Sport 4WD
-
Maintenance & Repair
Have 2005 Wrangler, quick flashing on left signal. Front and front bumper lights work. Rear tail light high intensity does NOT work for brake, hazard or turn. Low intensity normal driving light wor...
2005 Jeep Wrangler X
-
Maintenance & Repair
we changed the battery in a 2011 jeep and now the rear turn signals and brake lights don't work. the front ones work fine and we have tail lights. Also the 3rd brake light does work.
2011 Jeep Wrangler Unlimited Sport 4WD
-
Maintenance & Repair
I replaced the bulb and I am not sure what to do next. Also wanted to know if there is an easy location to get a look at the factory wiring/ fuse diagrams (my Haynes manual does not have it included)...
1991 Jeep Wrangler
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.