I know this may sound mad but is there anyway that a rear brakeing system would have been fitted to the front. All the brake pads that look similar to mine are for rear brakes. Chrysler sebring 2004 2.7 V6 cabriolet

40

Asked by brightspark Jun 18, 2015 at 01:33 PM about the 2004 Chrysler Sebring Limited Convertible FWD

Question type: Maintenance & Repair

Would a rear braking system ever be fitted to the front

144,885

T_S_T answered 9 years ago

The front pads, are bigger than back one,s,may look the same but would not fit from back to front.

1 people found this helpful.

Mark helpful

FordNut answered 9 years ago

The front does 70% of stopping on any front engine car. They need to be more durable

1 people found this helpful.

Mark helpful

Your Answer:

I know this may sound mad but is there anyway that a rear brakeing system would have been fitted to the front. All the brake pads that look similar to mine are for rear brakes. Chrysler sebring 2004 2.7 V6 cabriolet 2 Answers

Would a rear braking system ever be fitted to the front

2004 Chrysler Sebring Limited Convertible FWD

-

Maintenance & Repair
What would make my 2004 chrysler Sebring limited (2.7) idle up to 2000 when I turn the heat on to bleed the coolant system? 8 Answers

Ok I just fixed my coolant bleeder housing.. I didn't pull the intake all the way off I just got it up enough to get that last bolt.. Now after puttin it back together, as I'm trying to bleed the...

2004 Chrysler Sebring Limited Sedan FWD

-

Maintenance & Repair
What is the best way to fix a Chrysler Sebring convertible top rear windshield? 2 Answers

I have a 2000 Chrysler Sebring convertible top, but the glass came loose out of the top. The glass is still intact, but not in the top any longer. I called repair shops who told me I had to get an u...

Chrysler Sebring

-

Maintenance & Repair
TRYING TO REPLACE THERMOSTAT HOUSING FOR 2010 SEBRING BUT DEALERSHIP DOES NOT KNOW WHAT PART I NEED 2 Answers

I have a 2010 Chrysler Sebring with a 2.7 Liter V6 (Convertible). I am trying to replace the thermostat housing and none of the Chrysler dealerships that I have dealt with have the right part nor d...

2010 Chrysler Sebring Touring Convertible FWD

-

Maintenance & Repair
I have a 2010 chrysler sebring that the heat is not working correctly so i want to disconnect the heater hoses and blow the heater core but not sure how to do it on this newr car it is not set up like 3 Answers

Not exactly sure if this will fix my problem, the heater blows hotter on the drivers side and gets cooler as you go to the passenger side, it knocks the chill out of the air but doesnt heat the car ...

2010 Chrysler Sebring

-

Maintenance & Repair

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.