I have a 2012 Chrysler 200. And The battery will not start the car unless I have a jump. And as soon as I turn it off it won't start up again.
5 Answers
Check the starter relay switch.
Could be any of the following....your battery, battery cables, starter, starter relay. Always check the easy stuff first. Clean the connections at the battery and the starter.
peterce_777 answered 9 years ago
Sounds like the alternator is not recharging the battery.
I have the same problem with my car also and it is a 2012 Chrysler 200, I think it must be a defect in the car. I replaced the battery and it started and worked for about an hour of driving time and now it will only run with the jumper cables hooked up to it.
I had the same problem. Check the jumper posts located by the fuse box. make sure all connections are clean and tight. I found my connection to be a little loose and dirty, after a quick wrenching and cleaning..... All is fixed. For now.