I have 2001 ford expedition how to change the intake but every thing back together right did it twice and it won't crank can't figure it out will turn over but won't crank v8 5.4 liters

I have 2001 ford expedition how to change the intake but every thing back together right did it twice and it won't crank can't figure it out will turn over but won't crank v8 5.4 liters 3 Answers

I have a 2001 Ford Expedition. It starts up just fine, but if after I drive it for a little while and turn off the engine then try to restart the car will not turn on. The battery is working and the engine is "turning over," but just won't ultimately start up. Any ideas? 6 Answers

I have a 2001 Ford Expedition. It starts up just fine, but if after I drive it for a little while and turn off the engine then try to restart the car will not turn on. The battery is working and the...

I have a 2001 Ford Expedition. They blower motor works when the key is removed. I can remove the relay under the steering wheel and it will stop.I replaced the replay with the same out come. But can't 11 Answers

I have a 2001 Ford Expedition and the blower motor works when the key is removed. I removed the replay under the steering wheel and it stoped. So thought that was the problem. Replaced it and still ...

I have a 97 ford expedition and the anti theft light flashes and stalls engine .I have had the computer reset twice and it cranked with the anti theft light going off.When I go out to crank 2 hours later back to the anti theft light back on and want crank.Idles up the shuts down .I have had everyone envolved except the dealer.I actually reset computer 3 different times by turning ignition over on and off position times then anti theft light would go off .That worked 3 times now nothing.Some say it might be the control module but cant say for sure.Got any sugestions? 4 Answers

Can I devert anti theft?if yes how?

crank but won't start 4 Answers

HELP...while driving on the freeway one day my 97 ford expadition turned off I ended up puking it home cause I we couldn't figure out how to get it started. I've tried to jump start it I've tried ...