have to hit starter with hammer to crank

Asked by Raymond Oct 13, 2016 at 08:01 AM about the 1989 Chevrolet C/K 1500 Scottsdale 4WD

Question type: Maintenance & Repair

Having clicking sound from starter area have to get someone to tap starter while turning key to get starter to engage. Is this a bad solenoid or starter?

189,525

Paul answered 8 years ago

The starter is no good it needs to be replaced

1 people found this helpful.

Best Answer Mark helpful

159,355

Bob answered 8 years ago

Before replacing starter make sure the electrical connection(s) at the starter and battery are clean and tight. If they are, replace the starter.

2 people found this helpful.

Mark helpful

Your Answer:

have to hit starter with hammer to crank 2 Answers

Having clicking sound from starter area have to get someone to tap starter while turning key to get starter to engage. Is this a bad solenoid or starter?

1989 Chevrolet C/K 1500 Scottsdale 4WD

-

Maintenance & Repair
97 chevy z71 have to put starter fluid in to start 10 Answers

have to put starter fluid in to start,if I give I hit the gas to fast it will cut out real bad if I press the gas real slow it will rev up like it should,what ya think guys 97 chevy z71 vortic v8 5.7

1997 Chevrolet C/K 1500

-

Maintenance & Repair
so the other day i moved my 1997 chevy k1500 in my driveway and put my plow on then let it run for a while. I came bacj to it about 30 mins later and it was dead. I tried to crank it but got nothing. after going over everything replacing coil icm ecm crank sensor cam sensor plugs wires complete distributer from cap to oil pump . I have spark but when it it reaches distributer i get no spark to wires. Any ideas? I have never seen this before, im at a loss, please help!! 7 Answers

so the other day i moved my 1997 chevy k1500 in my driveway and put my plow on then let it run for a while. I came bacj to it about 30 mins later and it was dead. I tried to crank it but got nothing...

1997 Chevrolet C/K 1500 Silverado Extended Cab RWD

-

Maintenance & Repair
I have a 1989 Chevy 1500 with no AC from factory how much would it be to add AC? 7 Answers

Need help on pricing and whether its possible to add ac to a truck with no ac from the factory.

1989 Chevrolet C/K 1500

-

Maintenance & Repair
I have a 94 Chev Silverado 350 ci. Have replaced the starter/solonoid, the cables, good batt. Still getting the solenoid click. Have to try a couple times then it starts regular. What could be causing this problem? 4 Answers

Have replaced everything having to do with a solonoid clicking, starter, solenoid, battery, cables. Why does the solenoid still click before engaging?

1994 Chevrolet C/K 1500

-

Maintenance & Repair

Used GMC Sierra 1500

132 Great Deals out of 6,515 listings starting at $3,975

Used Ford F-150

320 Great Deals out of 13,991 listings starting at $1,712

Used Chevrolet C/K 2500

1 listing

Used Chevrolet Camaro

14 Great Deals out of 282 listings starting at $5,995

Used Chevrolet S-10

2 listings starting at $12,975

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.

have to hit starter with hammer to crank

2 Answers

Your Answer:

Shortcuts

Search Chevrolet C/K 1500 Questions

CarGurus Experts

Find great deals from top-rated dealers

Related Models For Sale

have to hit starter with hammer to crank

2 Answers

Your Answer:

Related Questions