Dodge RAM 1500 Questions Maintenance & Repair
Rattling Noise In Front
I have a 2006 Dodge Ram 1500 SLT 4.7 165.00 Thousand miles. i heard a rattling noise in the front every time i go over a rough road so i look under and saw my upper driver side ball joint was bad so ...
Why Does My 2007 Dodge 4.7L Truck Not Want To Go In Reverse? It Feel Like I...
2007 Dodge Ram Quad cab 1500 4.7 L V8 Engine 4WD.
A/c Clutch Will Not Engauge.is There A Fuse That Goes To The A/c Compressor...
cant find the fuse for the a/c compressor
Will A Transmission From A 97 Dodge Dakota V8 Magimun 2wd Fit In My 98 Ra...
Will a transmission from 97 dodge Dakota v8 magumun 2wd fit in my 98 ram 1500 v8 2wd
If I Let The Fuel Level Get Below 3/4 Of A Tank, The Engine Starts Losing P...
If I don't keep the tank full, the engine loses power and the truck shakes. I usually only put in about 10 gallons of gas and it clears the issue. It may run rough all of the time but it is certainl...
Transmission Stuck In 4th Gear.
Today my 2009 Dodge Ram got stuck in fourth gear. It will go in neutral and reverse but not in drive. It is stuck in 4th gear in the auto stick mode. It happened while at a stop light. Check engine li...
Is My Ignition Switch Bad?
Lights are on but will not make a sound when I turn the key to start
Why Does The Engine Light Stay On My 1997 Dodge B1500? So Many New Parts. O...
It only has 67,000 miles on V6. I bought it from Rochester NY. It was a telephone van.
98 1500 2 Wd Automatic 5.2 Ltr Will Not Move In Reverse
Please help my truck will not move in reverse.
03 Dodge 1500 Air Conditioner
03 Dodge 1500 Air conditioner is on but just seeps out after riding. Is this the fan not working or could it be something else? I was told the truck dash may need to be removed and that costs $$$ for ...
What Will Cause A 1997 Dodge Ram 5.9 To Pop And Back Fire When Trying To Cr...
whenever I crank the truck it will start back firing and popping then goes dead, what will be the cause of this happening
NEED HELP! Timing Chain Install 2002 Dodge Ram 1500 4.7
heads are torqued down, timing chain and sprockets are ready to go in. How do i keep everything in place, like the cams and what not. maybe this is easier. anyone have step by step, maybe with il...
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.