Ford Ranchero Questions Maintenance & Repair
Low Compression On Three Cylinders
I just purchased this car and got it running. It runs rough, misses and doesn't idle properly. A compression check showed no 5 cylinder was only 30psi. I added oil to determine if it was valves or...
Does The Dash Have To Be Removed To Install New Front Interior Pillar Cover...
I have to replace the pillar post covers and cannot find a way to do this without removing the dash and I have never replace a dash on a ranchero. Can someone provide some guidance please.
I Have A 351 Cleveland Engine That Just Wants To Backfire Through The Carb....
351c with a performer intake. Pop's on accel. Checked timing, it seems ok. I just can't get the intake to seal properly. No valley pan gasket,black rtv on the ends of the intake and using edlebrocks i...
How To Remove A Stuck Left Rear Brake Drum
this vehicle has been setting up for many years. trying to move to an other place for repairs. wheel will not turn.it seems drum is seased to thr shoe. have soaked with liquid wrench, don't think ...
Wiper's
Wiper comes on intermitenly. I turned off the switch but it still comes on. It seems to coenside with us having a starter problem. Coencidence or is there a connection?
How Do You Remove The Speedometer Cable From The Back Of The Dash Cluster O...
How do you remove the speedometer cable from the back of the dash cluster of a 1965 ford ranchero? I need to take off the dash cluster to replace none working gauges.
My Turn Signal Cam Is Broken I'm Pretty Sure. It Won't Hold When I Turn Lef...
Were do I find a cam? It's a 1971 steering colum I'm told, and if I do replace it how hard would it be?
1970 Ranchero. Would Upper Ball Joints Cause A Clunking Sound When Stopping...
Most of the front end parts are pretty tight. But I gave up on checking the upper ball joint because it just got 106 outside yesterday and I'm not sure how to check it for wear.
LOOKING FOR A '68 RANCHERO - TACH - ODOMETER CLUSTER PLASTIC CIRCUIT BOARD ...
PLEASE HELP ME FIND THESE ITEMS. CALL DAVID AT 504-469-6461 ... IF YOU CAN HELP. I POSTED PREVIOUS QUESTION AD, AND FORGOT TO PUT MY PHONE NUMBER.
Why Does The Car(1978 Ranchero) Run Perfect Until You Turn Headlights OFF?
Car has a 460 in it from a 75 ranchero, will start and run perfect with the headlights ON,the second you turn them OFF, the car chokes and stalls out all together
1968 Ranchero No Brake Lights Or Rear Hazard Lights.
Hi guys, I have checked the fuses, bulbs and turn signal switch for bad contacts. Any ideas would be appreciated. A wiring diagram would be great.
Where Does The Vacuum Hose Go From The Power Brake Booster
the part that the vacuum hose hooks on to is brittle and broken.
Where Can I Find Body Molding Trim
I need passenger door trim (upper and lower); driver door trim (uppere and lower); and left fender trim (upper, lower, and vertical). Would like to finish this car ASAP! Help is appreciated! Trim is ...
The Shifter, On The Colum Is Loose And Not Working Properly. What Do I Do?...
the gear shift leaver is loose and does not shift into gears. now what?
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.