Mazda MX-6 Questions Any type
Reverse Gear Problom I Belive
on a 1991 mx 6 MAZDA 2.2 4 cylinder engine automatic transmission, first is when shifting from gears only when going into reverse gear either from park to reverse or from drive into reverse, when pu...
Why Is My Car's Exhaust Louder Then Normal With Stick Exhaust
Having trouble figuring out why my exhaust is more loud then normal.
Looking For A M
I am looking for a Mazda Mx6 1994- 1997 Does anyone know where one is for sale? I live in the Kingsport TN area. Thanks
Steering Belt On 1997 Mazda Mx6 Ls
I cant seem to get my tensioner to move even though I've loosened it, do I have to remove my tire in order to get to a piece im missing? My steering wheel is really stiff and im also wondering if th...
Is My 95 Mazda Mx6 V6 2.5L An Intrusion Type Motor (timing Belt Broke)
Timing belt broke and wife turned motor over two times if it an intrusion type then she most likely cracked a piston or bent a valve
1996 Mazda MX-6 LS, Has A Burning Odor Coming From The Engine Compartment A...
Hard to explain the odor. Sometimes sweet like coolant or a smell like rubber or oil.
How Do I Fix My Left Turn Signal Light
My rear left turn signal isn't working
Engine
My very intelligent cousin of mine managed to put more than a quart of tranny fluid in my engine!! I didn't know a few months ago when he did it and my car has recently been smoking alot and tod...
91" Mazda Mx-6 LX Wont Start
My vehicles woouldn't hold the charge... I changed the alternator n the battery ,after doing so the idle kept going hi n low ,so I adjusted the thorttle cable down a bit , I took it for test drive n...
Gapping For 1996 Mazda Mx6 M Edition 2.5l
What should my plugs be tapped at
What Needs To Be Done To Get An MX6 Running That 's Been Parked For Years?
Hi, I came across a low mileage (47K) 1993 Mazda MX6 LS that's been stitting for 12 years. I'm told it was in great running condition previously. So I'd like to know what needs to be done to get it...
Power Window Goes Down, But Not Up.
Problem: Power window on driver side gets power for both going up and down, but only rolls down currently. (The fuses are all in working order, the power to the switch works as it should. Everything...
How To Tell My Ecu Or Pcm
How t to tell my ecu or pcm that i just changed the crankshaft position sencer. With out a obd 2.
Telling My Ecu Or Pcm I Just Changed The Crankshaft Position Sencer??????? ...
How To Tell My Ecu Or Pcm That I Just Changed My Crankshaft Position Sencer Its modified to an OBDII with kl pcm with an OBDII plug. But it still has data port. Data port does not give codes no mor...
Guru's
My obd2 reads.!!!! I want to tell it i changed the crankshaft position sencer. And to learn??? !!!... Now my car is modified with an OBDII PORT. I don't have a pbd2 tester. I guess this next part...
My 16v Engine Changed On Mx6 To 24v Is Ther Any Effects On Computer
Curious and urgently
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.