Ford Ranger Questions Maintenance & Repair
Clutch Will Not Disengage To Start The Motor.
Push the clutch to the floor put will not let the truck start.
I Have A 1999 Ford Ranger XLT Extended Cab And I Have Problems Staring It.
I replaced the battery, and tried to start the truck and when I turned the key to start, I would hear a click then I would lose all electrical power. I tried to touch and move the cable from the bat...
I Have A 1987 Ford Ranger 2.9L, Manual With Hydrolic Clutch. Does It Mean T...
Does it mean that I need to replace the clutch if the only engage / disengage position for the pedal is at the top 1/8th of redal travel? Paul ptw7172@gmail.com
2005 Ford Ranger Sputtering From Start Checked Codes Reads Cylinder 6 I Cha...
Over the windshield while driving I stopped it blew the cap right off what do I do
The Radio Cig Lighter Clock And Mobiliser Light Don't Work Could It Be A Fu...
Ford ranger reg.EN51 WJC.
I Have A 1998 Ford Ranger Xlt 4x4 3.0 It Will Go Into Gear But Will Not Mov...
went to put in gear but it dont move in any gear try to figure out what it could be cant afford to take to get worked on
What Is Name Of Engine Part That The Oil Filter Screws Into That Mounts To ...
oil leaking from there. I live in costa rica. My Tico mechanic replaced pistons rings, etc, etc, on my 1984 ford ranger, 2.9 liter 6 cylinder. Oil is still leaking. Yesterday he removed the part...
2000 Ford Ranger 2.3L
When I get my Ford Ranger 2000 2.3L up to 20-30 miles an hour, sometimes it starts to lose power and starts decelerating. If I don't try to accelerate immediately, I can keep it going, but it starts...
Does Anyone Have Advice For Putting A 96 2.3L In A 94 Ranger?
I removed the original 94 engine from the truck and am currently working on the 96 engine. The problem I have right now is with the crank shaft sensor, which has a different hook up and position in ...
96 Ford Ranger Clutch Will Not Engage
with engine running I can shift into any gear without using the clutch, absolutely no clashing of gears. I don't think the clutch disc has burned out. is there any fix without splitting the unit
Ignition Switch Problems For A Ford Ranger 1988
went to start it n when i turned key it turned all the way with no tention in it
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.