Ford Bantam Questions Maintenance & Repair

FORD BANTAM XLT ROCAM

MI BANTAM HAS A FLAT SPOT IF I PULL AWAY AFTER I WENT OVER A HUMP, OR IF I WANT TO PASS A NOTHER VEHICLE OR IF I SLOW DONW AT A HEALT SIGHN AND PULL AWAY MOSTLY IN 2ND GEAR AND 3RD GEAR SOME TIMES ...

Noise From The Front Of A Ford Bantam

Hi Sir. I am driving a Ford Bantam 1.3 XLT, 2007. There is a funny noise coming from the front when i am driving on a bumpy road. I have changed both wheel bearings, hub , the control arms and the b...

Ford Bantam Rocam 1.3 Don't Want To Start

Ford Bantam Rocam 1.3 don't want to start, could it be the earth wire or relay that is faulty

1.3 Ford Bantam B3 Engine Carburetor Model

Good day I have A Ford bantam 1.3 b3 carburetor model does any one have the torque setting on this engine for me please

Sweating Rear Wheel Cylinder On 2010 Ford Bantam

Hi guys. My 2010 Ford Bantam left rear wheel cylinder seems to be sweating a bit of brake fluid . I want to change it but just need to get the brake drum off. I'm trying to avoid taking the hub off ...

Ford Bantam Diesel To Petrol Conversion

I have removed my Ford Bantam 1.8 Diesel engine and I have bought a 1.3 Rocam Engine Do I only need to change the front harness or I need all the wiring from a petrol version of the car

Ford Bantam 1.6 2006

Hi, I bought 2006 ford bantam at SMD in September ROCAM 1.6 engine, computer box is 1.3. car was running until few days ago, the engine is cranking but not starting. the coil, sparks and fuel filt...

Ford Bantum 1.3 Rocam

Hi, my motor has been completely redone. I'm driving it for a couple of weeks. When I get to about 2000rpm it started misfiring and it is getting worse, this afternoon it was misfiring badly and the...

2009 1.3 Ford Bantam

Hi Guy's , Please kindly advise , i reside in Kzn Dbn , recently i bought a 2009 Ford Bantam 1.3 ( Ex Auction ) , the vehicle was marketed as Bank Repo , when i get the vehicle i now find that the i...

Ford Bantam Rocam Spark Plugs

Hi, Does the 2008 Ford Bantam Rocam 1, 3 and 1, 6 use different spark plugs? I was browsing the net and saw that they have the 1,3 as the NGK TR6B-10 and the 1, 6 as the NGK TR5B-13. Please advis...

Ford Bantam Engine Change

hi. im considering replacing my 1990 ford bantam cvh 1.4l engine with a compatible mazda engine. which mazda engine would fit? would the current gearbox fit on the new engine?

Ford Bantam 1.3 2010

Hello. How do I replace the dim bulb in the headlight assembly? It's easy to get the headlight lamp out but that little bulb, bloody breaking my fingers. Does it just pop out or is there a clip or ...

Where Does The Fuel Pump/float Sit On A New Spec Ford Bantam Bakkie

My fuel gauge moves up and down by alot, so i cant gauge how much fuel i have in my tank. I want to check the float but dont know where to find it. any help? also my bakkie idles between 1500rpm and...

Rear Axle From Bantam Rocam Fit Onto A 2001 Ford Bantam

Does a rocam bantam rear axle fit onto a 2001 bantam b3??

Ford Bantam Leisure 2001 Model Is Not Engaging Gears When Running The Engin...

Will Fiesta Engine Fit In Bantam

My Bantam 1.4 tdci engine got bust and I would like to know if a Fiesta 1.4 tdci will fit without any issues?

1998 Bantam Not Starting

I have a 1988 1.6 Ford Bantam. When I turn the key the normal dash lights come on, but nothing from the starter, not even a click. Checked the battery and starter motor wiring. It starts fine when I...

Wiper Motor Update With New Wiring Harness

good day people. im looking for the new wiring diagram layout for the wiper motor upgrade on the ford bantam 1.3 rocam a diagram or any sort of help would be appreciated

Starter Motor Does Not Turn

We have a 2006 Ford Bantam where the starter motor does not want to turn. The battery is still new and, fuses are okay. What could be the problem?

Tacho Meter Not Woking