Ford Bantam Questions Maintenance & Repair
2010 Bantam Not Starting But Cranks And Has No Ignition Or Oil Lights
The car started after the top gasket was replaced, after the test drive there was another pipe leaking we replaced that pipe the next day then the car did not want to start, it cranks but no fire, ...
What Might Be The Problem Of My Ford Bantam 1.3i Xl Rocam
I bought a new battery for my Ford Bantam 1.3i xl rocam. After replacing the top gasket and putting everything in order few days then it started having cold start problems.. It's making that sound ...
Clicking / Catching Noise When Turning At Driving Speed - Ford Bantam Rocam...
Hi, I have a ford bantam Rocam 1.3 2003 and have experienced a clicking noise when turning. The noise goes away when pushing the clutch pedal and will not occur when turning off a stand still, only ...
What Causes A Noise At The Front Suspension
Hi guys, my car has a knocking sound at the front suspension, I had my lower control arm changed, stabilizer links, bearings changed, What exactly might be the problem please help?
The Steering Pump On My Ford Bantam 2006 Model Rocam Engine.
The steering pump on my 2006 Ford Bantam has reached the end of its life. The new replacement pump differ on size on the pressure port of the new pump. ie 14mm for the new and 17mm for the old. Is t...
The Engine Cuts Whiles Driving
When driving the engine cuts on idling, what is the Cause of that?
No Power When Driving Forward
Bakkie have no power driving uphill,mechanic says it is 2 faulty valves,changed new timing kit like i was told,but still no power when it pull uphill
Ford Bantam Not Cranking
Hello, I have a ford bantam 1.3 rocam and every time it rains it wont crank at all.
Feul System Ford Bantum Rocam Enjin 1.3
Hi i have a ford bantum 1.3 rocam enjin, i have replaced the feul pump and the fuel intake line from the feul tank to the injectors but now when i drive the vehicle jurks and a strong smell of fuel...
Help With My Ford Bantam
Hi my ford bantam cut out whilst driving on a highway, and failing to start now.. First I thought it may be the alternator, however the battery is fully charged still.. any suggestions on what else...
Ford Bantam Rocam Motor Cuts Out When Steering Is In Full Lock
The engine idles at 950 rpm but as soon as the air cooler is on and the steering is in full lock the engine cuts out? have checked the steering pump and alternator. where else can I look? its a 1300
Ford Bantam Rocam Not Starting
my bakie i have remove the engine to seal the leaks on oils but now when i replace it there was no spark fuel is not coming oil light and bettary light also not showing
Won't Start Or Turn What Do I Do?
I have a ford bantam 1.3i xl rocam...the ignition goes on but when i turn the key the dash lights goes off and it does nothing...what can be the cause coz it just happened all of a sudden
My 1.3 Ford Bantam Rocam Won't Start
I've replaced the head gasket on my 1.3 Ford bantam rocam. Now it won't start it sounds axactly like a blown head gasket and I honestly can't find the fault
What Makes The Light Next To Clock Flash Faster
Hi. 2004 bantam Rocam 1.6 what causes the light next to the clock to flash fast?.And most of the lights flashing and clicking when I switch the engine off?
Car Wont Run Over 100km/h
Hi, I have a 2009 Ford Bantam 1.6 Rocam, I exchanged the motor with a overhauled one but now it has a noise in the engine that sounds like something is loose more in the head side and the motor wont...
I Have A 13XL Bantum Bakkie Year 2008
My car is leaking water somewhere. Sometimes I see water on the left hand side a little way in behind the wheel and other days not. I'm not sure if it is the head as my oil does not look milky but ...
Ford Bantam 1.6 XLT Jerking
I have a 2008 Bantam Rocam (1.6 XLT). while driving at a constant speed it would jerk every now and then. Had a service done but the jerking still there and gotten worse, Bakkie smells like it runs ri...
Ford Bantam 1.3 Rocam No Signal On Crank & Cam Sensor
My car cranks but no start and no signal or Power on crank &cam sensor but injectors got power and coil
Interval On Plug Replacement
The service intervals on my 2004 Bantam 1.3 with rocam engine is 15000 km. Must the plugs TR6B-10 also be replaced every 15000 km?? There is no 2004 model option below so I have selected 1995
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.