Ford Bantam Questions Any type
Ford Bantam Diesel To Petrol Conversion
I have removed my Ford Bantam 1.8 Diesel engine and I have bought a 1.3 Rocam Engine Do I only need to change the front harness or I need all the wiring from a petrol version of the car
Ford Bantam 1.6 2006
Hi, I bought 2006 ford bantam at SMD in September ROCAM 1.6 engine, computer box is 1.3. car was running until few days ago, the engine is cranking but not starting. the coil, sparks and fuel filt...
Ford Bantum 1.3 Rocam
Hi, my motor has been completely redone. I'm driving it for a couple of weeks. When I get to about 2000rpm it started misfiring and it is getting worse, this afternoon it was misfiring badly and the...
Engine No's 1.3 And 1.6
I Bought a 2008 Ford Bantam 1.3 Licence engine no is AL003872 but the Number on engine is 010051 Is this a 1.6 engine certainly goes better than a 1.3? I need a new computer but can't find one but...
2009 1.3 Ford Bantam
Hi Guy's , Please kindly advise , i reside in Kzn Dbn , recently i bought a 2009 Ford Bantam 1.3 ( Ex Auction ) , the vehicle was marketed as Bank Repo , when i get the vehicle i now find that the i...
Ford Bantam Rocam Spark Plugs
Hi, Does the 2008 Ford Bantam Rocam 1, 3 and 1, 6 use different spark plugs? I was browsing the net and saw that they have the 1,3 as the NGK TR6B-10 and the 1, 6 as the NGK TR5B-13. Please advis...
Spark Plugs And Petrol Pump
hi there my ford bantam just cut ou while driving starts good idealing is good but wen i get to 3rd gear it just cuts out then i have to wait a while before i can start again what can be the proble...
Where Does The Fuel Pump/float Sit On A New Spec Ford Bantam Bakkie
My fuel gauge moves up and down by alot, so i cant gauge how much fuel i have in my tank. I want to check the float but dont know where to find it. any help? also my bakkie idles between 1500rpm and...
Ford Bantam 1.3 2010
Hello. How do I replace the dim bulb in the headlight assembly? It's easy to get the headlight lamp out but that little bulb, bloody breaking my fingers. Does it just pop out or is there a clip or ...
Ford Bantam Engine Change
hi. im considering replacing my 1990 ford bantam cvh 1.4l engine with a compatible mazda engine. which mazda engine would fit? would the current gearbox fit on the new engine?
Ford Bantam 1.6 Cranks Does Not Start
i have a ford bantam 1.6 just cranks does not start.battery voltage 12.65v but when i jump start no problem for the whole day where is the problem please help
FORD BANTAM Overheating
I have a Ford bantam 20081.3 rocam which is now overheating, I took out something inside the return hose going to the radiator water bottle last month, I thought it was debris from fixing of radiator...
Ford Bantam Diesel Pump
what is the difference between the diesel pump of ford bantam 1.8 vs 1.4
Ford Bantam Rocam 1.3i Misfiring Issues
My ford bantam rocam 1.3i engine has recently been overhauled. Cylinder 2 spark plugs keeps dying. When I remove the spark plug, there seems to be oil on the thread of the spark plug and the plug is...
Oltanetar Conicting
I have new oltanetar but the old one was using one capole for egnishin but the the new one has 3 capoles haw to connect it is Ford bantam rocam 2007
Ford Bantam Lose Power
It goes but only start too preform after 5rpm dont know what the problem is and when it's hot its idling drops a bit then oil light goes on and of .any advise pleas
Can I Over Ride My Immobiliser To Start My 98 Bantam Bakkie
Lost my immobiliser at shopping center,I only need it to start the car, it activates the ignition, how do I over ride it to start
My Ford Bantam 1.3 Rocam Don't Want To Start. Please Help.
Good day. I'm having a problem with my Ford Bantam 1.3 rocam. I've changed my head gaskets and replace my oil and oil filters and I've torque the head the nm's I should've. I ensemble everything a...
Ford Bantam 1.3 Rocam Weird Overheating Problem
Hi All, new to this forum, but this is now where I am forced to try and get some guidance on the issue I have. My Bantam has now stated with this weird overheating problem about 3 months ago. I woul...
Ford Rocam Bad Starting
Ford rocam 2009 not starting when cranking but starts when push started. Any ide ?
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.